50 Pcs 5/16" x 1 3/4" Lag Shield | Concrete, Mortar, and Brick | AT&T Approved

Description

50 Pcs 5/16" x 1 3/4" Lag Shield | Concrete, Mortar, and Brick | AT&T Approved.
Orders are fulfilled through PerfectVision.
Includes:
- 50 5/16" x 1 3/4" Lag Shield
Info:
- Provides a threaded sleeve for lag screws in a concrete surface
- This lag shield is a screw style anchor designed for use with lag bolts
- It is suitable for use in concrete & mortar joints of block or brick walls
- Anchors are formed from Zamac alloy
- In harder masonry materials, short-style lag shields are used to reduce drilling time
Usage:
- Drill a 1/2” O.D. hole about 2” deep in a concrete or masonry surface and insert this sleeve. Then, you can thread a standard 5/16” x 2” lag screw into the sleeve for a secure friction grip in the concrete. The lag shield has a gradual restriction taper inside the sleeve which expands the sleeve when the lag screw is fully seated. Very useful where wood surfaces are not available to secure the dish reflector foot or wind legs.
Mechanical:
- Two piece casting. Shell haves are secured together by tabs in the casting
- Requires a 1/2” masonry drill bit for installation
- You must provide the lag screws of either 1 3/4” or 2” depending on the drilled
hole depth and the material thickness you are securing
- Lag shields are approved by Viasat.
- Lag shields are approved by AT&T.